Daystar KT09118BK Bedienungsanleitung PDF herunterladen

KT09118 Toyota 2003-04 4-Runner 2” Rear Coil

Spring Spacer Instructions

1. Jack up rear end and place jack stands under frame allowing rear suspension to move

up and down freely.

2. Disconnect lower shock mount bolts/nuts so that the rear axle droops and the coil

springs become loose.

3. Disconnect the pan-hard bar at the drivers side if the axle.

4. Remove the coil spring and the coil spring isolator/bump-stop.

5. Install the isolator/bump-stop into the new coil spring spacer and then onto the frame.

Install the coil spring in between the coil spring spacer and the axle. (Note: you may

have to pry the coil spring onto the axle pad.)

6. Jack up the rear suspension so that the coil spring seats into the coil spring spacer and

on the axle pad. Reconnect the lower shocks mount bolts/nuts and reconnect the pan-

hard bar.

7. Jack up the rear of the vehicle, remove the jack stands and lower the vehicle. Recheck

all bolts/nuts after 500 miles for ti

htness.

Instruction Sheet P10670 Rev00

www.DaystarWeb.com

Tech Support Contact Info

Phone: 623.907.0081

Fax: 623.907.0088

841 South 71

Avenue

Phoenix, AZ 85043

KT09118 Toyota 2003-04 4-Runner 2” Rear Coil Spring Spacer Instructions 1. Jack up rear end and place jack stands under frame allowing re

Keine Kommentare

Daystar KT09118BK Bedienungsanleitung