TOOLS NEEDED • Metric tools • Floor jack • Jack stand (s) 4 • Wheel chocks • Drill and 3/8 bit BILL OF MATERIALS Part # Description Qty M203
Thank you for choosing Daystar Products Daystar recommends a certified technician install this system . In addition to these instructi
20. Remove the stock bump stops and install the bump stop extenders, then install the stock bump stop into the extender as done on the front instal
3. Disconnect the ABS line form the bracket on the steering knuckle on the driver side then the passenger side. Remove the factory shocks.
15. After marking the holes, remove the bracket from the axle and drill the 2 3/8 holes. 5. With the coil spring removed install the daystar lift
10. Install the front wheels and lower the vehicle to the floor. 11. Place the wheel chocks at the front wheels and jack up the rear sus-pension.
Kommentare zu diesen Handbüchern